Plug Spinning Info

VIP免费

2024-11-24 0 0 11.4KB 1 页 5.9玖币

侵权投诉

E -

While putting the Plug-Spinner back together, since The "Plastic-Pen" case

was broken for the Pix, I used another Large Pen casing.

You can use small PVC or even wood I guess... Anyway, I cut a 1/4" slit

down the upper-end (By the Paper-Clip) and bent the spring thru the slit,

then 90 Degrees down. Once the Rubber-Black Tubing was placed over that

part, it secured it just fine. No Epoxy needed. For "Testing" use some

Black-Tape here.

Also, to get it to work & Spin the plug past the top Pins, "Wind-Up" the

handle about 3½x to 4x prior to "Spinning".

Works GREAT... BTW, I tried a BUNCH of other springs...

IE: NO "Pen-Spring" will work, and the spring needs to be of a pretty good

strength... THICK Spring wire etc.

Hope this saves anyone time in making your own... The Black Rubber-

Tubing is OPTIONAL! Test your product with just these four parts:

1) Street-Cleaner stick of about 3 - 4 inches

2) Strong Spring

3) Plastic "Casing" (Like my Pen-Case).

4) Paper-Clip or other "Handle"

To test, you probably do not need to Solder the end to the steel stick, but

twist-it around, solder only after U are satisfied it works well.

E -

- U

AWH@cox.net

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

5.9 玖币 0人已下载

立即下载 VIP免费下载

已全部加载

Plug Spinning Info.pdf

共1页,预览1页

还剩页未读，继续阅读

声明：本站为文档C2C交易模式，即用户上传的文档直接被用户下载，本站只是中间服务平台，本站所有文档下载所得的收益归上传人(含作者)所有。玖贝云文库仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私，请立即通知玖贝云文库，我们立即给予删除！

Plug Spinning Info

相关推荐

开通VIP享超值会员特权

作者详情

相关内容

热门标签

举报选择: